The Ultimate Hard-Component Suspension Solution
Upgrade your Jeep Wrangler JL’s suspension with the Cruise Series 10-Piece Kit, a complete solution for correcting caster issues, eliminating wandering, following ruts in the road, and reducing death wobble. This all-in-one suspension overhaul replaces your entire set of control arms and track bars, giving you full control over alignment, axle centering, and suspension geometry—all while providing enhanced durability and off-road capability. From daily driving to extreme off-roading, this kit outperforms factory components, ensuring improved handling, stability, and ride comfort on any terrain.
What’s Included in the Kit?
- Cruise Series Front Upper Control Arms (CRS-J-JL-FU2)
- Cruise Series Front Lower Control Arms (CRS-J-JL-FL2)
- Cruise Series Rear Upper Control Arms (CRS-J-JL-RU2)
- Cruise Series Rear Lower Control Arms (CRS-J-JL-RL2)
- Cruise Series Front Track Bar (CRS-J-JL-FTB1)
- Cruise Series Rear Track Bar (CRS-J-JL-RTB1)
Key Features Benefits
- Eliminates caster issues steering instability – Regain full caster control, reducing wandering, rut-following, and loose steering after lifting your Jeep.
- Corrects axle positioning pinion angle – Adjustable control arms allow precise re-centering of axles to prevent driveline vibrations and premature component wear.
- Reduces death wobble – The adjustable front track bar helps eliminate steering oscillations by maintaining a centered axle and proper suspension geometry.
- Heavy-duty steel construction – Built from high-strength steel tubing, these components deliver long-term durability and maximum off-road capability.
Fix Common Jeep JL Suspension Issues
The Jeep Wrangler JL suffers from insufficient caster angle from the factory, and when lifted, this issue is exacerbated—leading to wandering, poor handling, and excessive steering corrections. This kit completely solves those problems by correcting caster angles, re-centering the axle, and optimizing alignment.
Additionally, this kit is a major solution for death wobble—a violent front-end oscillation often caused by poor track bar alignment, worn bushings, and incorrect suspension geometry. When paired with upgraded steering components, this kit greatly reduces or even eliminates death wobble by keeping the axle properly centered and the suspension geometry correct.
Durable Two-Stage Powder Coating
Each component undergoes a zinc primer base coat for corrosion resistance, followed by a top coat available in 10 colors for a personalized look.
Optional Hardware Upgrade
Designed to re-use factory hardware, with optional Grade 8 hardware kits available for rusted or worn-out bolts.
Upgrade Today!
The Cruise Series 10-Piece Kit is the ultimate hard-component suspension upgrade for the Jeep Wrangler JL, correcting caster issues, re-centering axles, eliminating wandering, and significantly reducing death wobble. For those looking to fully optimize their lifted Jeep, this kit provides everything needed to regain stability, control, and durability. Upgrade today and experience unmatched ride quality, confidence-inspiring steering, and total suspension control!
Notes: Some, (not all) factory axle mounts need to be "clearanced" to accept our larger bar. If needed, it is only a minor amount of trimming to be done. This applies to the front track bar only. Please see our Youtube channel for a video addressing this.
Ideal use:
Cruise Series is best for daily driving, light off-road, and weekend trail use. Balanced for comfort and capability without overbuilding for extreme terrain.
Not sure which series fits your needs? Contact us for guidance.
- Alignment recommended after install.
- Install difficulty: moderate. Basic mechanical skills recommended.
- Estimated install time: 4–8 hours depending on experience.
- Some trimming may be required on factory axle mounts (front track bar). See our YouTube channel for guidance.
- Install videos and support available. Check product Description for links.
- Designed to reuse factory hardware. Upgrade available if yours is worn or missing.
| Make | Model | Submodel | Years |
|---|---|---|---|
| Jeep | Wrangler | 2018 - Present |
Each rebuild kit includes all necessary components to replace and restore wearable parts.
| Vehicle | Jeep Wrangler JL / JLU (18–Present) |
| Color | Black or Blue or Charcoal or Green or LightGreen or Orange or Purple or Red or White or Yellow or Custom Color - Other than what is listed above. Extra charge varies. We will reach out after order is placed. |
| Lift Size | 0" — 6" or 6"+ |
| Hardware | No Hardware or Complete Kit |
| Series | Cruise Series |
| Brand | CORE 4X4 |
Suggested Products
Jeep Wrangler JL / JLU 18+ 2pc Cruise Series Front Lower Adjustable Control Arms
$ 288.70
Jeep Wrangler JL / JLU 18+ 2pc Cruise Series Front Upper Adjustable Control Arms
$ 251.95
Jeep Wrangler JL / JLU 18+ 2pc Cruise Series Rear Lower Adjustable Control Arms
$ 288.70
Jeep Wrangler JL / JLU 18+ 2pc Cruise Series Rear Upper Adjustable Control Arms
$ 251.95
Jeep Wrangler JL / JLU 18+ Cruise Series Front Heavy-Duty Adjustable Track Bar
$ 278.20
Jeep Wrangler JL / JLU 18+ Cruise Series Rear Heavy-Duty Adjustable Track Bar
$ 288.70Accessories & Add-ons
Jeep JL/JLU Fox 2.0 Performance Shock Kit
$ 874.99
Quicker Disconnect Sway Bar Links | 0-2" Lift | Wrangler JL and Gladiator JT
$ 176.95
Quicker Disconnect Sway Bar Links | 2.5"-6.0" Lift | Wrangler JL and Gladiator JT
$ 176.95
Adjustable Rear Sway Bar End Links | Wrangler JK and JL | 0-6"
$ 90.95
