Enhanced Strength, Adjustability, and Off-Road Performance
Upgrade your Jeep Wrangler JK (2007-2018) with the Camp Series Rear Control Arm Set, engineered to provide improved durability, axle alignment, and suspension flexibility. Whether you're looking for better on-road comfort or off-road capability, this set of upper and lower control arms delivers the strength, adjustability, and articulation needed for any driving environment.
What’s Included in the Kit?
- Rear Upper Control Arms (CMP-J-JK-RU2)
- Rear Lower Control Arms (CMP-J-JK-RL2)
Key Features and Benefits
- Heavy-Duty DOM Tubing Construction – Built from 1.75” OD DOM tubing for the lower arms and 1.5” OD DOM tubing for the upper arms, all featuring a .313" wall thickness, making them significantly stronger than factory control arms and most aftermarket alternatives.
- Optimized Suspension Geometry – Adjustable control arms allow for precise pinion angle correction, axle centering, and alignment, crucial after installing a lift kit. Designed to accommodate 0 to 6 inches of lift.
- Premium Joint Technology – Features Johnny Joints at the adjusting ends for unmatched articulation and tapered polyurethane bushings at the axle ends for vibration dampening and extended longevity.
- Improved Handling and Drivability – Corrects rear axle positioning, eliminating issues caused by improper suspension alignment such as premature tire wear, instability, and drivetrain stress.
- Recommended Pairing – For a fully optimized rear suspension, we recommend pairing this set with the Camp Series Rear Track Bar (CMP-J-JK-RTB1) to ensure complete axle centering and maximum stability.
Restore Proper Suspension Geometry and Drivability
Lifting your Jeep Wrangler JK changes the geometry of your suspension, affecting axle alignment, pinion angle, and overall drivability. Without properly adjusted control arms, your vehicle may experience rear axle misalignment, instability, and excessive drivetrain strain.
Our adjustable Rear Upper and Lower Control Arms allow you to fine-tune your suspension for optimal handling, ensuring a smooth ride, proper rear axle placement, and improved articulation. Whether you're rock crawling, towing, or daily driving, these control arms provide the stability and performance needed for a controlled, predictable ride.
Two-Stage Powder Coating for Maximum Durability
Every set of Camp Series Rear Control Arms undergoes a rigorous two-stage powder coating process for long-lasting protection against rust, corrosion, and wear: Zinc primer base coat – Adds a protective barrier against rust and environmental damage. Durable top coat in 10 color options – Personalize your Jeep’s suspension with a vibrant, long-lasting finish while adding an additional layer of defense against harsh conditions.
Proudly Made in the USA
Manufactured in our Orem, UT facility, our Camp Series Rear Control Arms are crafted to the highest standards of American engineering. We source high-quality materials locally and oversee the entire manufacturing process, ensuring superior strength, durability, and performance.
Optional Hardware Upgrade
Designed for easy installation using factory hardware, but if your Jeep has rusted or worn-out bolts, we offer optional Grade 8 hardware kits, available separately, to ensure a smooth installation.
In Conclusion
The Camp Series Rear Control Arm Set is a must-have upgrade for any Jeep Wrangler JK owner looking to improve rear axle alignment, drivability, and off-road capability. With heavy-duty construction, full adjustability, and premium joints, this set ensures a smoother ride, better handling, and maximum suspension performance.
Upgrade today and experience the CORE 4X4 difference in quality, durability, and American craftsmanship!
Ideal use:
Camp Series is built for overlanding and moderate off-road. More articulation and durability than Cruise, suited for loaded vehicles and longer trips.
Not sure which series fits your needs? Contact us for guidance.
- Alignment recommended after install.
- Install difficulty: moderate. Basic mechanical skills recommended.
- Estimated install time: 4–8 hours depending on experience.
- Some trimming may be required on factory axle mounts (front track bar). See our YouTube channel for guidance.
- Install videos and support available. Check product Description for links.
- Designed to reuse factory hardware. Upgrade available if yours is worn or missing.
| Make | Model | Submodel | Years |
|---|---|---|---|
| Jeep | Wrangler | 2007 - 2018 |
Each rebuild kit includes all necessary components to replace and restore wearable parts.
| Vehicle | Jeep Wrangler JK / JKU (07–18) |
| Brand | CORE 4X4 |
| Color | Black or Blue or Charcoal or Green or LightGreen or Orange or Purple or Red or White or Yellow or Custom Color - Other than what is listed above. Extra charge varies. We will reach out after order is placed. |
| Series | Camp Series |
| Lift Size | 0" — 6" or 6"+ |
| Hardware | No Hardware or Complete Kit |
Suggested Products
Accessories & Add-ons
Jeep Wrangler JK / JKU 07-18 8pc Camp Series Adjustable Control Arm Kit
$ 1,270.45
Jeep Wrangler JK / JKU 07-18 10pc Camp Series Adjustable Control Arm, Track Bar Kit
$ 1,658.95
Jeep Wrangler JK / JKU 07-18 12pc Camp Series Adjustable Control Arm, Track Bar, Steering Kit
$ 2,729.95
Jeep Wrangler JK / JKU 07-18 16pc Camp Series Adjustable Control Arm, Track Bar, Steering, End Link Kit
$ 3,097.45
Jeep Wrangler JK / JKU 07-18 2pc Camp Series Rear Lower Adjustable Control Arms
$ 367.45
Jeep Wrangler JK / JKU 07-18 2pc Camp Series Rear Upper Adjustable Control Arms
$ 335.95
