Made in USA
Orem, Utah
Lifetime Guarantee
Unconditional
10 Colors
In-house powder coat
Fully Adjustable
0-6" of lift
3 X-Series Options
Only Core 4x4
RockJock Uni-Balls for Front Axle Housings are used in 3-link suspension applications, where the passenger’s side upper control arm has been eliminated and all of the suspension load is now being applied to the one axle housing mounting location. Our Uni-Balls press into the stock bushing holes on the casting side, driver’s side ONLY) of the front differential housing and provide a durable solution that incorporates a 5/8 in. thru-bolt hole for heavier hardware. This Uni-Ball will press into a stock JK or a stock TJ/LJ/XJ/MJ/ZJ housing, as well as aftermarket replacement differentials from companies such as Dana, UD-60s), Dynatrac, East Coast Gear, Fusion 4x4 and Currie Enterprises, cast center housings ONLY, does not apply to 9 in. / fabricated style differentials). Additionally, “most in. aftermarket differentials that are intended for installation in a JL/JT vehicle, still retain the bushing specs. of a JK bushing, making this the applicable Uni-Ball to install in an aftermarket differential, again, cast center only, not 9 in. style going into a JL/JT., for STOCK JL/JT housings, see our RJ-301002-101 Uni-Ball. The mounting width of the center pivoting assembly is 2 in., to allow it to fit into the fork on JL/JT/JK/TJ/LJ/XJ/MJ/XJ front upper control arm, however, the 5/8 in. thru-bolt hole will require drilling of the bolt hole in the control arm fork. Uni-Balls feature a sealed bearing assembly, so no greasing is required. Finish is clear zinc plating.
| Make | Model | Submodel | Years |
|---|---|---|---|
| Jeep | Cherokee | 1984 - 2001 | |
| Jeep | Comanche | 1986 - 1992 | |
| Jeep | Gladiator | 2020 - Present | |
| Jeep | Grand Cherokee | 1993 - 1998 | |
| Jeep | Wrangler | 1997 - 2006 | |
| Jeep | Wrangler | 2004 - 2006 | |
| Jeep | Wrangler | 2007 - 2018 | |
| Jeep | Wrangler | 2018 - Present |
| Vehicle | Jeep Gladiator JT (20–Present) or Jeep Wrangler JL / JLU (18–Present) |
| Brand | RockJock |
Reviews of Core 4x4
5.0
★
★
★
★
★
132 reviews
SA
Samuel “SamDaman904” Anscher
Mar 23, 2024
★
★
★
★
★
I meant to put this reviewing about a year ago now, but ever since I’ve had the core 4 x 4, upper and lower control arms on my 2017 ram 1500, they have worked flawlessly leave been on many offering chips, and I’ll definitely be buying new accessories from them in the future and their new upper control arms that they’re offering for all of the ram trucks. Fantastic customer service fantastic health very automotive, off-road, friendly, and any aftermarket thing for your truck or SUV that they currently have!
JO
Jaime Overmyer
Nov 23, 2025
★
★
★
★
★
Korby was extremely helpful in helping me find the right part for my truck. He was kind, knowledgeable, and patient while I asked a million questions. He also went out of his way to find the right shipping option for me since it’s tricky where I live. I’m looking forward to getting the parts so I can fix my truck and go adventuring again soon!
DA
Dastrup Auto
Mar 25, 2019
★
★
★
★
★
I have bought a bunch of sets of arms, track bars and even had custom work done by Core 4x4. Just yesterday, Spence and Cam delivered an awesome cross member they designed and built for me! All of their products have been exceptional! I have personally seen their progression with design changes/updates. They truly take pride in their work and products. Quality control is second to none! They’ve also helped me diagnose issues with different jeeps I’ve had, as well as Dodge/Rams. These guys know their stuff! Really! I trust them whole heartedly and absolutely love their products/quality of work! I’ve referred many people, and will always continue to do so. Keep up the good work Core4x4!
DN
Devan Nelson
Mar 25, 2019
★
★
★
★
★
Had a great experience with Core 4x4, I desperately needed a custom track bar and found out just a couple days before Easter Jeep Safari. Spence was a huge help and made it happen with plenty of time to spare. Their parts are top notch!
PM
Paul Melancon
Aug 25, 2025
★
★
★
★
★
Ordered a control arm and track bar kit for my WJ from Core 4x4 on Monday 7/28 and received it today, Friday 8/1. Im not a state or two away, im in CT aka the other side of the country. Communication is phenominal, emails were responded too in an hour or less. Parts arrived well packed, not damaged, and are great quality for my needs. There arent many companies left that service customers as well as Core 4x4 and i wont hesitate to check them out again if i need something else. Well done!
JT
Jay Taylor
May 27, 2025
★
★
★
★
★
Had a worn out set of rear upper control arms on my TJ. These were old rubicon express long arms. can’t buy replacements and no one makes a direct fit replacement.
Talked with Korby at core off road sent some measurements and photos and a week later new arms showed up. Packaging was perfect fit was perfect.
Would highly recommend giving these guys a call.
RD
Reagan D'mello
Dec 23, 2025
★
★
★
★
★
Love the product. Excellent customer support 👍🏽 …
AM
Adam M
Sep 24, 2025
★
★
★
★
★
First time buying from Korby @ Core 4x4 and it’s being nothing short of a great experience. I bought the non adjustable Trail kit for my 5th Gen Ram 1500 with a 2” lift. The welds look great, nice powder coat finish and quality bushing. Had some trouble fitting the grease nipples due to the powder coating but a thread tap would fix that. They fit easily and perform great. I felt the improvement straight away. No more wheel hop on hard acceleration which was my main reason for the purchase.
I was missing some smaller bushings needed for the 5th Gen and Korby’s custom service was on point, with responsive emails and mailing out the missing parts straight away. Very happy with their products and customer service. Highly recommended company👌🏽
M
Matt
Mar 23, 2024
★
★
★
★
★
The best products on the market. 95% of my xj is core 4x4 products
CL
Cade Leith
Mar 23, 2024
★
★
★
★
★
Have full upper/lower CA set on both front and rear axles on a 96 ZJ. These are the rubber bushing sets not joint sets. I have beat the hell out it in the Nevada desert for 2 years and has been great. I don’t go fast but I do articulate suspension a lot. Super solid and haven’t any issues. Just inspected the entire set recently due to some banging under it. Turns out the banging is lower rear shock bushings. Inspected each CA along the way nothing. Aside from dirt and obviously winter roads and what not still in excellent condition, bushings are solid like the day they were installed. I’ll add that I’m about tapped on a short arm at 4.25(less with settle) so the front CA’s get beat on just from that, still they’re like new. Paint is great condition, this set is red. I would definitely buy again. Another plus for me, Utah isn’t local necessarily, but it’s nice to support businesses closer to me.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Specifications
| Vehicle | Jeep Gladiator JT (20–Present), Jeep Wrangler JL / JLU (18–Present) |
| Brand | RockJock |
