Why do you need this kit?
- Cures driveline vibration caused by lifting a Cherokee 4 1/2" or more.
- Allows you to remove your transfer case drop, gaining you 1" of ground clearance or more, right under the belly of the beast where you need it most! This also moves your transfer case further away from the rocks and allows you to raise your t-case skid plate (if equipped).
- Great for running at lower lift heights to avoid dropping your transfer case.
- Wow, it's so inexpensive!
- Great for tall lift kits where a transfer case drop just isn't enough.
- Installation is easy compared to kits that include a new output shaft.
- It just plain works great!
- You can often use another XJ front driveshaft with this yoke! That means your front and rear driveshafts will be identical!
Kit includes:
- 1310 CV transfer case yoke
- Installation hardware
FITS:
- All 96 and newer XJ Jeep Cherokees
*231 transfer cases with the 3 hole mounting seal housing will need the seal flange sold as an option above. This is typically found on older 231 cases(generally pre-1996). If you are not sure, please look at the back of your transfer case before ordering. If you are still unsure after looking, please call us.
| Make | Model | Submodel | Years |
|---|---|---|---|
| Jeep | Cherokee | 1984 - 2001 |
| Vehicle | Jeep Cherokee XJ (84–01) |
| Brand | CORE 4X4 |
| Hack N Tap Drill Jig – 27 spline | No Drill Guide or Add Drill Guide |
| HK #62, Drill Bits and Tap for HNT SYE | I will use my own drill bits and tap or Add drill bits and tap |
