Made in USA
Orem, Utah
Lifetime Guarantee
Unconditional
10 Colors
In-house powder coat
Fully Adjustable
0-6" of lift
3 X-Series Options
Only Core 4x4
Details
Core 4x4's Cruise Series 4-piece rear control arm set replaces all four worn factory stamped-steel arms on the Chevy Avalanche 1500 (2002–2006). The factory arms use soft rubber bushings and a fixed length, so there's no way to re-align the rear axle or correct pinion angle after a lift or leveling kit. These Core 4x4 arms are a serious step up: heavier steel construction, fresh poly bushings, and adjustable length to set rear axle alignment and pinion angle back to spec.
They're also built to grow with your truck. When you want more articulation later, each arm's adjustable end accepts the same forged Rock Jock Johnny Joints our Camp arms use, so you can upgrade in place without replacing the arms.
Includes: Rear upper control arms (pair) and rear lower control arms (pair); mounting hardware (bolts, nuts, and washers).
Specs:
- Upper arms — 1.625 in. o.d. × 3/16 in. wall steel
- Lower arms — 1.875 in. o.d. × 3/16 in. wall steel
- Bushings — poly, all ends
- Adjustable length — for rear-axle alignment and pinion-angle correction
- Lift range — 0–6 in.
- Made in the USA
- Lifetime warranty — bend it or break it, we'll replace it
- Wear items (bushings, joints) — covered for 18 months
Suspension Type — Standard or Autoride (Z55): Select at checkout. Z55 trucks have factory rear air leveling; the Autoride version includes the ride-height sensor mounting tab on both rear upper arms. If you're not sure which you have, check the RPO sticker in the glove box for a Z55 code.
Notes:
- Hardware is included with your arms. If you ever need replacements down the road, the matching kit is available separately.
- Future upgrade: each arm's adjustable end accepts a forged Rock Jock Johnny Joint — the rear uppers take CE-9112N-22 (two) and the rear lowers take CE-9114 (two).
- Running a lift? The 5-piece rear kit (CRS-G-800-AVA-RK5) adds the adjustable track bar to recenter the axle side-to-side.
Parts:
- Upper poly bushings — BSH-UPBH-CB, 9/16-in. bolt (2 per upper arm, 4 for the upper pair).
- Lower poly bushings — BSH-LOBH-CB, 9/16-in. bolt (2 per lower arm, 4 for the lower pair).
- Replacement hardware kit — CRS-G-800-RS4-HWK.
Fits:
- Chevy Tahoe (2000–2006)
- Chevy Suburban 1500 (2000–2006)
- Chevy Avalanche 1500 (2002–2006)
- GMC Yukon / Yukon XL 1500 (2000–2006)
- GMC Yukon Denali / XL Denali (2001–2006)
- Cadillac Escalade / ESV / EXT (2002–2006)
- 1500-series only. Does NOT fit 2500-series HD.
Built With
See individual component specifications
| Make | Model | Submodel | Years |
|---|---|---|---|
| Chevrolet | Avalanche 1500 | 2002 - 2006 |
Construction & Materials
See individual component specifications
| Brand | CORE 4X4 |
| Color | Black or Blue or Charcoal or Green or Light Green or Orange or Purple or Red or White or Yellow |
| Lift Size | 0" — 6" |
| Series | Cruise Series |
| Suspension Type | Standard or Autoride (Z55) |
Use the vehicle selector on our website to shop by your year, make, and model. On product pages, use the kit builder to select your color, series, lift height, and any add-on options, then add to cart. If you need help, call or email our team.
Standard orders typically ship within 1–3 business days of ordering. Custom color orders take approximately 5–10 business days. Because everything is built in-house, we can turn orders quickly even for custom specifications.
You can reach our team through the contact form on our website, or browse to the Contact Us page. Our team is available to answer pre-sale and technical questions before and after your purchase.
Reviews of Core 4x4
5.0
★
★
★
★
★
132 reviews
JC
John Cutler
Oct 24, 2025
★
★
★
★
★
In September 2025, we visited CORE 4x4 in Orem, Utah. CORE 4x4 makes control arms and other similar parts that stiffen the suspension of an off-road 4x4 vehicles, so that the off-road vehicles can travel on more rugged terrain. CORE 4x4 used to share this building with another business, and since this other business has moved elsewhere, CORE 4x4 will continue to expand and grow their business. Good for CORE 4x4 to be a growing company and to expand into the vacant part of the building.
JI
Jerome Segura III
Jun 26, 2025
★
★
★
★
★
I bought the 16pc Cruise Series Adjustable Control Arm, Track Bar, Steering, End Link Kit to replace a worn budget 4" lift on my used JKU. These are top quality parts; very solid. Customer service is unsurpassed. They even matched prices on my order placed before the tax day sale. I made an error in ordering a drag link flip kit; they were quick to help me fix this too. There's peace of mind knowing these components are made in the USA. Thank you. 👍👍
GN
Glenn Nowosad
Jan 22, 2026
★
★
★
★
★
I just finished installing the Peak 2.0 Front Suspension system with the Core 4x4 Blue Tacoma Rear Suspension system on my 2024 TRD Offroad Premium Tacoma. The two upgraded suspension systems really made a difference in how the ride feels, whether we’re off-road or on the road. A big thank you to Korby and the team at Core 4x4 for their support and for getting the shipping sorted out so quickly!
RH
Roger Hooks
Jun 26, 2025
★
★
★
★
★
2018 Ram 2500 Rear Control Arms and Rear track Bar been running for about a year, Great Solid Products and great one on one customer service, same day response with issue resolved!
Thanks Korby!
SG
Sal Giordano
Sep 24, 2025
★
★
★
★
★
I want to take the time to share my experience with Core 4x4.
I have a 2004 Jeep Wrangler and was looking to upgrade some suspension parts. I went with Core 4x4 upper & lower adjustable control arms and a front adjustable track bar. Everything arrived quickly, and right out of the box I was impressed with the quality and craftsmanship.
I had a few questions during installation (measurements and torque specs), and I spoke with Korby on a couple of occasions. Not only did he send me detailed instructions, but he also shared an installation video specific to the part and vehicle I was working on, something you don’t get from many companies.
The control arms fit perfectly, look great, and perform exactly as I hoped. I did run into an issue with the front track bar touching the front diff. When I reached out, Korby had me send pictures and then immediately offered two solutions: his bar guy could make a different bend and send it out to me, or I could get a full refund. His response honestly blew me away. As much as I wanted to run the Core 4x4 track bar, I chose the refund. Korby sent me a prepaid shipping label right away, no hassle.
My experience with Core 4x4 has been excellent. Korby was extremely understanding, communicative, and helpful every step of the way. The parts I received were high quality, and the customer service was second to none.
I would absolutely recommend Core 4x4 10 out of 10 times and will be using them again. Just a great American company with awesome people who truly care about their customers.
Thank you Korby, and thank you Core 4x4!
AM
Adam M
Sep 24, 2025
★
★
★
★
★
First time buying from Korby @ Core 4x4 and it’s being nothing short of a great experience. I bought the non adjustable Trail kit for my 5th Gen Ram 1500 with a 2” lift. The welds look great, nice powder coat finish and quality bushing. Had some trouble fitting the grease nipples due to the powder coating but a thread tap would fix that. They fit easily and perform great. I felt the improvement straight away. No more wheel hop on hard acceleration which was my main reason for the purchase.
I was missing some smaller bushings needed for the 5th Gen and Korby’s custom service was on point, with responsive emails and mailing out the missing parts straight away. Very happy with their products and customer service. Highly recommended company👌🏽
N
niceguyr1
Mar 24, 2023
★
★
★
★
★
I purchased upper and lower adjustable arms for my WJ and lowers were missing the spacers. I didn't know until 3 months later when I was installing them. With absolutely zero hassles they quickly sent me the missing spacers. Fantastic product and service! Huge thank you guys for the awesome service and parts!!! Customer service is quickly becoming a lost commodity and you guys gave me hope that it's still alive and well, you just have to buy from the right people... Thanks again for going above and beyond! 👍👍
TM
T Mac
Mar 23, 2026
★
★
★
★
★
CORE 4X4 Company produces/manufactures exceptional products. My rear upper and lower control arms and rear track bar were powder coated custom Fox “Shock Orange” for my 2024 Bronco Wildtrak. OEM looks minimal compared to the CORE 4X4 control arms. Plus they’re adjustable, serviceable and rebuildable. Shipment was very fast and packaging used custom foam wrapped around the arms and heavy duty boxes. Not even UPS could damage. Korby L. was great to work with and responded quickly with emails and product information. Great products. Great people from the State of Utah. All Made in the USA. 5 Stars!!!
RC
Ryan Colligan
Mar 4, 2026
★
★
★
★
★
I have nothing but good things to say about Core 4x4. I have the crawler series on my JKU and we take it all over the place. These parts handle everything we throw at them.
VK
Victor Keele
Sep 24, 2025
★
★
★
★
★
Great customer service. I got my front upper and lower control arms and hardware on Friday afternoon. It didn’t come with instructions so I called Core 4X4 and they immediately e mailed me the instructions. Also, the kit I got had the spacers missing so I called. It was late Friday by thus time but they took care of the issue first thing Monday morning and I got the spacers on Tuesday. Great company.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Specifications
| Color | Black, Blue, Charcoal, Green, Light Green, Orange, Purple, Red, White, Yellow |
| Suspension Type | Standard, Autoride (Z55) |
| Brand | CORE 4X4 |
| Lift Size | 0" — 6" |
| Series | Cruise Series |
| Tags | |
|---|---|
| Tags | |
