Made in USA
Orem, Utah
Lifetime Guarantee
Unconditional
10 Colors
In-house powder coat
Fully Adjustable
0-6" of lift
3 X-Series Options
Only Core 4x4
RockJock's weld-on Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined DOM tubing. This specific joint is a 2 1/2 in. o.d. and features a 2.440 in. mounting width and a .515 in. thru bolt hole. Grade 8 greasable bolt with nut and washers included.
| Brand | RockJock |
Reviews of Core 4x4
5.0
★
★
★
★
★
132 reviews
MH
mark hinz
Mar 2, 2026
★
★
★
★
★
Went above and beyond to get the parts we needed to complete our customers build for Moab Easter safari cant thank you enough for all your hard work and efforts
Thank you and look forward to working with you in the near future
BC
Brad C
Mar 24, 2021
★
★
★
★
★
Outstanding experience! I asked Core to build me a set of custom control arms that were larger/heavier than they normally build. They gladly accepted the challenge and turned out an expertly crafted and super strong product ahead of schedule. Fit and finish are excellent. Spence and Cameron were a pleasure to work with every step of the way. And all of this for a very reasonable price. I highly recommend these guys!
CL
Cade Leith
Mar 23, 2024
★
★
★
★
★
Have full upper/lower CA set on both front and rear axles on a 96 ZJ. These are the rubber bushing sets not joint sets. I have beat the hell out it in the Nevada desert for 2 years and has been great. I don’t go fast but I do articulate suspension a lot. Super solid and haven’t any issues. Just inspected the entire set recently due to some banging under it. Turns out the banging is lower rear shock bushings. Inspected each CA along the way nothing. Aside from dirt and obviously winter roads and what not still in excellent condition, bushings are solid like the day they were installed. I’ll add that I’m about tapped on a short arm at 4.25(less with settle) so the front CA’s get beat on just from that, still they’re like new. Paint is great condition, this set is red. I would definitely buy again. Another plus for me, Utah isn’t local necessarily, but it’s nice to support businesses closer to me.
P
Paul
Mar 24, 2023
★
★
★
★
★
I've been having trouble with the track bar (on my 2nd gen Dodge) since I installed the 3rd gen Synergy adapter bracket and a 3rd gen stock bar.. oddly, they call it a '3rd gen bracket' and the stock 3rd gen bar doesn't quite fit, making contact with the bracket. I had attempted to clearance the bracket but it was still making contact and I could feel it over large bumps.
I reached out to a lot of companies, but Core 4x4 offered to make a custom bar for the application with adjustability and dual Johnny joints. The first pass on it didn't work but they sent me out another passenger side end that made it fit incredibly well.
This was all done solely over email/descriptions/pictures/measurements.
Bar is super high quality and heavy duty, made in the US by a family owned company and carries a lifetime warranty. The customer service was responsive and superb, and the price was a lot less than I expected.
OJ
Oldgreg jr
Mar 23, 2025
★
★
★
★
★
Good company, they offer well built parts and Great customer service.
I had a couple of hang ups with my control arms that I purchased, they were very easy to work with and found the solution to make them work.
MB
Melody Baker
Jan 22, 2026
★
★
★
★
★
I ordered a part for my 03 Jeep TJ and all I can say is wow! Korby at Core 4x4 is a total rockstar!! There was a glitch with my payment and within minutes, Korby reached out to me to get it fixed, then sent my receipt with the tracking number. I lost the number and reached out to him during the Holidays and got a rapid response with the number again. I can’t say enough about the customer service and the quality of parts. Thank you!!
K
Korosunagi
Jul 26, 2025
★
★
★
★
★
I broke a grease fitting off in my end link. I thought I was going to have to buy a new one. Reached out to Core 4x4 and wham! bam! They fixed it and sent it back with 2 day shipping. Got it a day early even. If they couldn't fix it they were going to send me a new one. Now that's customer service! They are now a permanent part of my garage.
Thank you Core 4x4!
RH
R and H H
Oct 24, 2025
★
★
★
★
★
Top notch company. Mechanic lost bolts that clamp upper control arms. Korby sent out spare bolts no charge. Best customer service I’ve come across in a long time. Only suspension brand I’ll ever use.
TH
Todd Hume
Jan 22, 2026
★
★
★
★
★
Their products are great but the service is even better!! Thanks Korby.
OK
oleg k
Nov 23, 2025
★
★
★
★
★
I recently ordered a set of control arms from Core 4x4, and the entire experience was absolutely top-notch from start to finish. The ordering process was smooth, the parts arrived quickly, and the control arms themselves are extremely high quality—solid construction, great finish, and clearly built to last.
I also want to give a special shout-out to Korby, the guy I spoke with during the process. His customer service was amazing. He went above and beyond to make sure I got exactly what I needed, answered all my questions, and made the whole experience stress-free. You don’t see service like that very often these days.
If you’re looking for high-quality suspension components backed by truly exceptional customer service, I highly recommend Core 4x4. I’ll definitely be buying from them again.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Specifications
| Brand | RockJock |